 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
Plates and Nutring Sets - Plates and nutrings are usually sold as a set complete with
bolts, washers, gaskets, hold down tabs, and standard 2 1/4" Fill Assembly. Each fitting and
option is then an additional charge both so you see where your money is going and so that you
only pay for what your getting and using. This way, instead of getting charged one base price
for parts you may or may not need you only get charged for what you will need and want.
bolts, washers, gaskets, hold down tabs, and standard 2 1/4" Fill Assembly. Each fitting and
option is then an additional charge both so you see where your money is going and so that you
only pay for what your getting and using. This way, instead of getting charged one base price
for parts you may or may not need you only get charged for what you will need and want.
Check Valves - No complete fuel cell
goes out of our shop without working check
valves. To the right is a table with the check
valve size, corresponding fill which it is offered
with, and price of each. Remote check valves
are available upon request so please contact us
for a price, as it's dependent on the check valve.
goes out of our shop without working check
valves. To the right is a table with the check
valve size, corresponding fill which it is offered
with, and price of each. Remote check valves
are available upon request so please contact us
for a price, as it's dependent on the check valve.
Fittings - Standard fittings include all hardware for the
fitting, additional hose end adapter and standard 2-4 feet of
hose. Remote Pickups are complete with remote fitting
and hardware, complete with individual nutring, gasket,
hold-down tabs, and any other necessary hardware.
Returns are complete with all necessary fitting hardware.
fitting, additional hose end adapter and standard 2-4 feet of
hose. Remote Pickups are complete with remote fitting
and hardware, complete with individual nutring, gasket,
hold-down tabs, and any other necessary hardware.
Returns are complete with all necessary fitting hardware.
Collectors - Collectors are not included in the design of a fuel cell but can be added to
almost any cell over 10 gallons in capacity. We usually recommend a single collector for most
cells but some, such as designs with a tunnel, may require dual depending on the setup of the
pickup system. Each collector comes with the collector itself, 2-3 check valves, and necessary
hardware to install it.
almost any cell over 10 gallons in capacity. We usually recommend a single collector for most
cells but some, such as designs with a tunnel, may require dual depending on the setup of the
pickup system. Each collector comes with the collector itself, 2-3 check valves, and necessary
hardware to install it.
Senders - Senders can be installed on any unit 10 gallons and above. We can install
them on smaller cells but usually do not recommend it. They can be attached directly onto
the plate or as stand-alone remotes as needed. Sending Units include sender, gasket, and
necessary hardware for normal attachment. For Remote Senders price includes the
sender, gasket, nutring, necessary hardware, and installation.
them on smaller cells but usually do not recommend it. They can be attached directly onto
the plate or as stand-alone remotes as needed. Sending Units include sender, gasket, and
necessary hardware for normal attachment. For Remote Senders price includes the
sender, gasket, nutring, necessary hardware, and installation.
Dual and Quick Fill Assemblies - The Dual Fill Assembly comes with dual 3"
fill necks, complete with hardware, as well as 1 3/4" or 2" check valve. They come with
either a single 6X10 plate set or dual 4X7 plate set, depending on the design of the cell.
Quick Fill Assemblies come with a standard 3" fill neck, complete with hardware, and 1" or
1 1/4" check valve. Quick Fill Assemblies can be attached to any plate size for any cell.
fill necks, complete with hardware, as well as 1 3/4" or 2" check valve. They come with
either a single 6X10 plate set or dual 4X7 plate set, depending on the design of the cell.
Quick Fill Assemblies come with a standard 3" fill neck, complete with hardware, and 1" or
1 1/4" check valve. Quick Fill Assemblies can be attached to any plate size for any cell.
Tunnels and Tubes - A tunnel or a tube can be
installed on most cells as needed. Because of the extra
material, labor, and curing time they do come with an
additional charge. Please contact us about custom designs
that may have a tunnel.
installed on most cells as needed. Because of the extra
material, labor, and curing time they do come with an
additional charge. Please contact us about custom designs
that may have a tunnel.
Dipsticks - Dipsticks can be installed on any cell for a
minimal charge. They're attached to the plate as a -8 fitting.
Price: $35
minimal charge. They're attached to the plate as a -8 fitting.
Price: $35
Fill Assemblies - Each Fill Assembly comes with a standard 2 1/4" fill neck,
flapper, wagon wheel, and hardware. 3" fill necks are available as a Quick Fill
Assembly for any size plate and fuel cell. Also, we offer 45 degree fills for Dual Fill
Assemblies or upon specific request.
flapper, wagon wheel, and hardware. 3" fill necks are available as a Quick Fill
Assembly for any size plate and fuel cell. Also, we offer 45 degree fills for Dual Fill
Assemblies or upon specific request.
Services - All Services are offered to fuel cells manufactured within the past 5 years and come
with a warranty that guarantees any repairs for the remaining life of the cell and guarantees all
replacement parts and additional equipment for 5 years from the date of installation.
with a warranty that guarantees any repairs for the remaining life of the cell and guarantees all
replacement parts and additional equipment for 5 years from the date of installation.
Repairs - We now offer repair services on all fuel cells
(excluding Jazz and other rubber-type cells) built within the
past 5 years that can vary in price greatly depending on the
service and cell. Please contact us with the service you
need.
(excluding Jazz and other rubber-type cells) built within the
past 5 years that can vary in price greatly depending on the
service and cell. Please contact us with the service you
need.
Replacement Parts - Replacement hardware, such as
plates, bolts, and foam, are assessed on a case by case basis.
They can range anywhere from a few dollars for replacement
bolts to a few hundred dollars for replacement foam so please
contact us with what you need so we can give you an
accurate price. If a replacement fitting or new plate is needed
please see the prices above (additional labor may be charged).
plates, bolts, and foam, are assessed on a case by case basis.
They can range anywhere from a few dollars for replacement
bolts to a few hundred dollars for replacement foam so please
contact us with what you need so we can give you an
accurate price. If a replacement fitting or new plate is needed
please see the prices above (additional labor may be charged).
Refurbishment - Refurbishing of existing plates and
parts is now available. We can refurbish any plate set,
remote, pickup system, and give the cell a complete
overhaul to restore it to like new condition. Basic prices
are listed but completed overhauls are considered and
quoted uniquely. For more information on refurbishment
please contact us.
parts is now available. We can refurbish any plate set,
remote, pickup system, and give the cell a complete
overhaul to restore it to like new condition. Basic prices
are listed but completed overhauls are considered and
quoted uniquely. For more information on refurbishment
please contact us.
Additional Equipment - Need to add something to
your cell. Chances are we have it. We can add most
equipment, such as extra plates and senders, to any cell built
within the past 5 years. Check above for prices (additional
labor may be charged).
your cell. Chances are we have it. We can add most
equipment, such as extra plates and senders, to any cell built
within the past 5 years. Check above for prices (additional
labor may be charged).
Parts and Hardware
- Because of the actual manufacturing process material for the bladder as
well as all labor for the cell is included in the price of the bladder.
Consequently, all the available options on this are listed near or at cost,
helping reduce your total cost per unit.
well as all labor for the cell is included in the price of the bladder.
Consequently, all the available options on this are listed near or at cost,
helping reduce your total cost per unit.
Price:
- 4X6 Plate Set....$100
- 4X7 Plate Set....$108
- 6X10 Plate Set..$134
Price:
- 2 1/4" Fill Assembly....STD
Standard Pickup:
- -4......$12
- -6......$15
- -10....$28
- -12....$45
Remote Pickup:
- -4......Call
- -6......Call
- -8......$31
- -10....Call
- -12....Call
Standard Return:
- -4......$6
- -6......$7
- -8......$11
- -10....$15
- -12....$27.50
|
Price:
- Single.......$215
- Dual.........$300
Price:
- Remote....................$98
Price:
- Dual Fill Assy........$230
- Quick Fill Assy......$120
Plate Refurbishment -
Comes with new gasket,
bolts, washers, stat-o-
seals, flapper, as well as a
complete cleaning of the
plate and fittings.
Comes with new gasket,
bolts, washers, stat-o-
seals, flapper, as well as a
complete cleaning of the
plate and fittings.
- 4X6........$47
- 4X7........$51
- 6X10......$53
Pickup System Cleaning -
This service comes with a
complete cleaning of the
inside and outside of the
cell, new hose, as well as
refurbishment of the pickups
(remote or standard).
Please call for prices.
This service comes with a
complete cleaning of the
inside and outside of the
cell, new hose, as well as
refurbishment of the pickups
(remote or standard).
Please call for prices.
 |  |  |  |  |  |  |
Click Here to go to open up a new window with
our Order Form, or print out our Custom Design
page, fill it out and fax it us for a free quote.
our Order Form, or print out our Custom Design
page, fill it out and fax it us for a free quote.
| HARMON Racing Cells "Competitive Prices and Exceptional Service" |
| adjusted every 2 weeks. Please call with any questions. |