8 a.m.-5 p.m.
Sat. & Sun.
Call for Time
Assumption of Risk – It is well recognized that automobile and boat racing is a very dangerous activity that may result in injury or
death. Even with the utmost care and prevention racing involves certain, inherent risks. Persons using HARMON Racing Cells
products and accessories ASSUME THE RISK inherent in these types of activities.
Disclaimer – Due to the inherent risk and danger involved in automobile and boat racing HARMON Racing Cells does not assume
any risk or responsibility for injury or death in the event of an accident.
Limited Lifetime Warranty – Each HARMON Racing Cells fuel cell comes with a limited 5 year warranty to guard against
premature tears, punctures, or leaks that may occur during normal use of the cell. Defects that are a result of poor or defective
material or workmanship are also covered so long as HARMON Racing Cells is notified and corrects the defect. HARMON Racing
Cells will not provide any additional warranty, guarantee, or reimbursement for repairs, replacements, or any other services
performed on a fuel cell by any third parties without our consent.
HARMON Racing Cells warranties its products for 5 years from the date of manufacture unless explicitly stated otherwise. The
Limited Lifetime Warranty travels with the fuel cell and is guaranteed to the current owner of the cell. After the initial 5 years all fuel
cells are eligible for an additional 2 years of coverage after a full and complete inspection has been performed by HARMON Racing
This warranty shall be void to any fuel cell that has been subjected to accident, abuse, alteration, damage through the use of improper
additives or non-compatible fuel, improper installation, or improper maintenance (or lack thereof).
Failure to maintain and inspect the fuel system may result in malfunction of the fuel delivery system or a void of the warranty.
Inspections of the fuel lines, pickup, return, fill, check valve, plate, sender, and mounting hardware as well as the bladder itself
should be checked before every race. Things to look for include: cracks in the bladder, leaks at the gaskets or hose ends, secure
mounting hardware, clean fuel filters, and any other component that may cause the fuel cell to not perform correctly or adequately.
Maintenance includes an annual cleaning of the bladder, can, and plate to ensure proper operation and to minimize the chance of
cracks, leaks, punctures, and failure of the fuel delivery and safety system. This also includes an annual inspection of the fuel lines.
Note: Silicone sealants are suitable for use with alcohol fuels only.
- Any modification of any HARMON Racing Cells product or accessory may result in failure of the system and may void any
- All HARMON Racing Cells products and accessories should be inspected before a race or after an accident.
- Regular maintenance should be performed annually or semiannually on the fuel cell to keep it in working order. Yearly
inspections should also be conducted to check for cracks, tears, and leaks, especially around the gaskets, “O” rings, and stat-
o-seals. Failure to do so may void any warranty and prevent system from working properly.
- Certain fuel mixtures may have an adverse affect on HARMON Racing Cells products and accessories. Additives, such as
nitro or alcohol, may also have adverse effects on the cell.
- It is not necessary to use any sealant on any gasket surfaces. If you feel the need to use sealant, only use silicone sealants
suitable for use with gasoline.
|Maintenance and Inspections
|Maintenance Parts and Upgrades
All repairs should be performed by HARMON Racing Cells. In the event that the fuel cell cannot be delivered to or repaired by
HARMON Racing Cells in time, repairs may be made in the field using approved repair kits and techniques and with the knowledge
and consent of HARMON Racing Cells. However, the fuel cell must be delivered to HARMON Racing Cells as soon as possible for
inspection and proper repair. Failure to do so may result in a void of the warranty or failure of the system.
Each HARMON Racing Cells fuel cell is subject to free maintenance parts and upgrades as they become available. Maintenance parts
includes, but is not limited to, gaskets, check valve balls, stat-o-seals, tabs, bolts, washers, and any other component integral to the
basic performance and safety of the fuel cell. Parts that are deemed out-of-date are subject to free upgrade and replacement by
HARMON Racing Cells.
Damaged and used parts must be submitted to HARMON Racing Cells and, depending on condition of the product, may or may not
be approved for refund.
Custom Fuel Cells and Parts
Depending on the complexity and uniqueness of a “custom” fuel cell or part it may or may not be eligible for a refund. Any person
seeking a refund for a custom fuel cell or part must submit it to HARMON Racing Cells for approval.
Standard Fuel Cells and Parts
Any “standard” part and fuel cell may be returned for a full refund (less shipping costs) provided that it is in the same condition as
when it left the manufacturer. Standard fuel cells and parts that have been modified in any way, shape, or form are subject to policy
regarding custom fuel cells and parts as set forth below
HARMON Racing Cells reserves the right to refuse a return for any reason once a transaction is complete. That said, below is our
policy regarding returns for standard and custom designs:
|Please call or
fax orders to: