Fabricator
Our Fabricators have a very challenging job. It involves replicating a fuel cell can. Seems simple until you see some of our designs.
The challenge is in making correct reductions allowing for the thickness of the coating to be applied. Still seems simple. The reductions are not equal around. Depending on lid style, angles, notches and sumps, will make the reduction different, but the result has to be the same, a tight fit in the can. Any sloshing or movement around in the can from the bladder will cause wear on the bladder causing a tear or pin hole.
There is the challenge.
The challenge is in making correct reductions allowing for the thickness of the coating to be applied. Still seems simple. The reductions are not equal around. Depending on lid style, angles, notches and sumps, will make the reduction different, but the result has to be the same, a tight fit in the can. Any sloshing or movement around in the can from the bladder will cause wear on the bladder causing a tear or pin hole.
There is the challenge.
Responsibilities
Fabricators responsibilities are to create a finished mold to the exact measurements of the inside of the aluminum can.
Its a 2 step process. First you build it with cardboard, cloth it up then it move on to be coated.
Everyone is dependent on Fabrication to it being the correct measurements and plate locations marked.
You can make mistakes prior to it being coated. Once coated it better be write. If its wrong it cost to replace it in that
the labor, and material cost. But the biggest problem is that when it's wrong, it puts the customer behind in his build,
which also cost him money. And we do have a reputation to uphold, "no one does it better than Harmon"
Its a 2 step process. First you build it with cardboard, cloth it up then it move on to be coated.
Everyone is dependent on Fabrication to it being the correct measurements and plate locations marked.
You can make mistakes prior to it being coated. Once coated it better be write. If its wrong it cost to replace it in that
the labor, and material cost. But the biggest problem is that when it's wrong, it puts the customer behind in his build,
which also cost him money. And we do have a reputation to uphold, "no one does it better than Harmon"
Duties
Duties in include but not limited to
- Keeping on task if if ahead of schedule
- Coordinate production workflow for one or multiple orders
- Plan and prioritize operations to ensure maximum performance and minimum delay
- Determine raw materials needed to cover production demand
- Collect all material and equipment needed to begin the process
- Take precision measurements to ensure perfect fit of components
- Select or modify components according to measurements and specifications
- Maintain tool in condition that does not compromise safety
- Report on issues, malfunction or defective parts or tools
Qualifications
Fabricator qualifications are
Experience with shop hand tools, utility knife, pneumatic tools, table saw, band saw, router.
Including an understanding of safe use, and willing to use all safety clothing, eye gear, gloves, face mask
Proper use and maintenance of all these
Physically healthy,
Strong communication skills
Experience with shop hand tools, utility knife, pneumatic tools, table saw, band saw, router.
Including an understanding of safe use, and willing to use all safety clothing, eye gear, gloves, face mask
Proper use and maintenance of all these
Physically healthy,
- stamina for long hours of standing 2-3 hours
- Having manual dexterity skills to work with small parts
- Ability to lift 50 pounds
- Able to work in uncontrolled environment of 40-100 degrees depending on weather conditions
Strong communication skills
- Able to read and write English to deliver information to management and coworkers,
- Able to understand technical documentation and cad drawings.
- Good math and analytical skills for converting and reducing fractions, and decimals.
- Accurately read and measure with a tape measure, drywall square, ruler and angle finder.
- Understanding for the use of quality control and follow the guidelines.
- Detail-oriented, organized and problem solver.
- Motivated to achieve precision-built products in a safe and timely manner.
- Team player, but independent worker.
- Coordinate with other employees as a team and work independently, efficiently
- in a timely manner and stay on task.
* Please send resume to, jim@harmonracingcells.com
