35 Gallon - CUBT35
Designed around classic buggies our Buggy/Tunnel line of fuel cells keep the center of gravity low while allowing the passage of shift rods, cables, and drive shafts through the center portion of the fuel cell. Each fuel cell features a 10" wide by 6" tall tunnel offset 2" towards the passenger side to allow center or side shifting transmissions to be used while keeping the fuel cell centered in the chassis. While designed for popular buggies of the past, this fuel cell has found use in buggies, sand cars, street cars, and UTVs. Each unit comes with dual outlets located in the rear of the tunnel, AN-06 return fitting, and sending unit provision (fuel level sensor). All fuel cells are E85 compatible as well as fuel level sensors (excluding UTV sensors).
- Triple Coated Resin Bladder
- Yellow Safety Foam
- Fully TIG Welded Aluminum Can
- 10" x 6" Tall Tunnel Offset to Passenger Side
- Two 4X6 Fill Plates
- 3" Remote-Style Fill
- 1" Vent/Check Valve
- AN-06 Return
- AN-08 Remote Pickups Located in Rear of Tunnel
- FIA FT3-1999 Certification
- 7 Year Warranty
(Length x Height x Top Width x Bottom Width)
38"x 18" x 10.5" x 18"