AN 10 Remote Pick up
Pickups allow the fuel to exit the bladder and inter the fuel delivery system. they can be located on the main fill plate (traditional) or on it's own dedicated plate (remote) on the top, side or bottom of the fuel cell. These pickups range in size from AN-6 to AN-12 and can be used in sets as a "crossover" to allow fuel to flow from one bladder (or one side of the bladder) to the other. Featuring a welded aluminum bung the connector fitting cannot loosen over time and allows low fuel levels to "drain" into the pickup fitting.
NOTE: Cannot attach a hose to the "inside" end and, consequently, are not for use as 'side pickups'.
- AN -10 Fitting Assembly
- 6 Hole Round Remote Plate Set
- 1/4 - 28 x 1" Bolts (6)
- 1/4" Nylon Washers (8)
- .125" Stainless Steel Hole Down Tabs (2)